How to Remove a Bathroom Mirror

Removing a Bathroom Mirror Glued to the Wall

1. Soften the Glue

   Using a heat gun or blow dryer, begin heating up the corners of the mirror by holding the heat source six to 12 inches away from the glass. Progressively work your way from each corner to the center of the mirror.

   Continue this process for at least 15 minutes to loosen the glue holding the mirror to the wall.

2. Pry the Mirror From the Wall

   With your partner holding the mirror firmly, use a pry bar or large putty knife to pry the corners of the mirror from the wall. Slide the blade of the bar or knife into one of the mirror's corners, and begin slowly and gently pulling the handle towards you until the corner is loosened from the wall. Repeat this process on each corner until all four are loose. Continue prying each of the four sides while progressively working toward the center of the mirror.

   You may be able to completely remove smaller mirrors with prying alone, in which case you can skip to step four. For larger mirrors that won't fully separate from the wall by prying, continue to the next step.

3. Saw Through the Adhesive

   Take a wire saw, piano string, or guitar string, and grasp it firmly in each hand. Slip the wire between the mirror and wall at one of the top corners of the mirror, and move the wire diagonally toward the center until you meet resistance at the adhesive. Begin “sawing” through the adhesive by sliding the wire in a back-and-forth motion. Continue sawing until you're roughly 3/4 of the way to the bottom of the mirror.

   If cutting the adhesive becomes too difficult at any point, you can apply more heat and gentle prying.

4. Remove the Mirror From the Wall

   At this point, you and your helper should be able to pull the mirror off the wall. Pull slowly and carefully to minimize the risk of the glass shattering. 

Removing a Bathroom Mirror Clipped to The Wall

1. Remove the Side Clips

   Use a putty knife or screwdriver to remove the clips holding the sides of the mirror. If the screws spin in place but don’t come out, that means they’re likely screwed into the drywall instead of a wall stud. When that’s the case, grasp the clip with your non-dominant hand while gently pulling it away from the wall as you unscrew it with your dominant hand.

   Once removed, set the clips and screws aside, and store them in a bag so you don't lose them.

2. Loosen the Bottom Clips 

   Loosen, but don’t remove, the bottom clips until they’re no longer tight against the mirror. Have your partner hold the bottom of the mirror in case it accidentally drops off the wall.

3. Remove the Top Clips and the Mirror

   With your partner holding the mirror, remove the mirror's top clips. Once the clips are removed, grasp one side of the mirror while your partner grabs the other. Gently lift the mirror out of the loosened bottom clips and carefully set the mirror aside.

When to Call a Professional

If your bathroom mirror is particularly large, covers the entire wall, or is otherwise difficult to access, it might be wise to hire a professional contractor or glass installer to remove it. You may also consider hiring a pro if the mirror's adhesive proves too difficult to remove yourself.